If you are using Design Space and the files are opening super tiny, please do the following to resize your file to the proper size.
1. Open the file in your software
2. Highlight the entire image
3. Find the longest side of the blank (in DS, look at the Width and Height fields, and you will see which number is highest which indicates the longest side)
4. Lock your aspect ratio
5. Change the measurement of the longest side to 1.5, 2, or 3 (Whichever size blank you have). The other side will automatically adjust itself.
2. Highlight the entire image
3. Find the longest side of the blank (in DS, look at the Width and Height fields, and you will see which number is highest which indicates the longest side)
4. Lock your aspect ratio
5. Change the measurement of the longest side to 1.5, 2, or 3 (Whichever size blank you have). The other side will automatically adjust itself.
***WE DO HAVE A FEW BLANKS THAT ARE ODD SIZED***
(EXAMPLE: Green Hand Stethoscope)
In this case, get a ruler or measuring tape and measure the acrylic to determine the longest side. Then, follow those same instructions as posted above. (If the blanks longest side measures 3.5in. Enter that into the appropriate field [Height or Width] and the other side will automatically adjust itself.)